Patches

333 Half Evil Patch

  • Embroidered Patch
  • 3.5×2.5 inch
  • Iron on or Sew on Application
  • Plastic Backing & Die Cut Borders

 

Anarchy Red Round Patch

  • 3 inch
  • Embroidered Patch for Jackets and Vests
  • 100% Rayon Thread Synthetic Embroidery. Plastic Backing with Japanese Iron on Glue. Twill Fabric.
  • Customize your Clothing with Patches
  • Sew on the Patch to Leather Jackets or Vests. Iron on the Patch to Denim Materials.
  • Features Plastic Iron on Backing. Heat Press at 270 Degrees Fahrenheit for 12-30 Seconds
  • Clean Cut Embroidered Borders for Easy Sewing

Area 51 Tour Guide Patch

  • 3×3 inch
  • Embroidered Patch for Jackets and Vests
  • 100% Rayon Thread Synthetic Embroidery. Plastic Backing with Japanese Iron on Glue. Twill Fabric.
  • Customize your Clothing with Patches
  • Sew on the Patch to Leather Jackets or Vests. Iron on the Patch to Denim Materials.
  • Features Plastic Iron on Backing. Heat Press at 270 Degrees Fahrenheit for 12-30 Seconds
  • Clean Cut Embroidered Borders for Easy Sewing

Each patch is hand done with dye sublimation making cracking or peeling near impossible. Each patch features a black border and an adhesive back that makes applying to clothing easy!

How to attached your patch to fabric:

Important When Applying: Whether you are using a household iron (back side) or a heat press (front side) please use a non-stick sheet (teflon or parchment paper) on the front of the patch. The reason for this is that sometimes when heated the adhesive comes through to the front side of the patch and this will prevent the front side of the patch sticking to something.

Peel off the protective backing

Heat Press: 300° for 15 seconds, press from the front side of the patch

Iron: 300° (wool setting) for 15 seconds, press from the back side of the fabric

Patches can be dry cleaned or washed in a washing machine with cold water

Air dry

This dracula patch certainly doesn’t suck! Featuring the art work of Allan Graves this patch is monstrous in both design and size measuring 3.5 inches long and 3 inches wide. 

 

A short guide with our recommendations for applying your new patch.
  1. Garment should be clean & freshly laundered (including new items).
  2. Set iron to “COTTON,” 400 degrees, and let fully heat up for five minutes.
  3. Thoroughly iron area of garment where patch will be placed.
  4. Place patch on garment, embroidery facing up.
  5. Place cotton cloth or light towel over patch and using a slow circular motion, press firmly for 30 seconds.
  6. Turn garment inside out, and iron the back of the patch for 30 seconds.
  7. Let cool for one minute. If the edge of the patch can be lifted, repeat step 6.

Each patch is hand done with dye sublimation making cracking or peeling near impossible. Each patch features a black border and an adhesive back that makes applying to clothing easy!

How to attached your patch to fabric:

Important When Applying: Whether you are using a household iron (back side) or a heat press (front side) please use a non-stick sheet (teflon or parchment paper) on the front of the patch. The reason for this is that sometimes when heated the adhesive comes through to the front side of the patch and this will prevent the front side of the patch sticking to something.

Peel off the protective backing

Heat Press: 300° for 15 seconds, press from the front side of the patch

Iron: 300° (wool setting) for 15 seconds, press from the back side of the fabric

Patches can be dry cleaned or washed in a washing machine with cold water

Air dry

Each patch is hand done with dye sublimation making cracking or peeling near impossible. Each patch features a black border and an adhesive back that makes applying to clothing easy!

How to attached your patch to fabric:

Important When Applying: Whether you are using a household iron (back side) or a heat press (front side) please use a non-stick sheet (teflon or parchment paper) on the front of the patch. The reason for this is that sometimes when heated the adhesive comes through to the front side of the patch and this will prevent the front side of the patch sticking to something.

Peel off the protective backing

Heat Press: 300° for 15 seconds, press from the front side of the patch

Iron: 300° (wool setting) for 15 seconds, press from the back side of the fabric

Patches can be dry cleaned or washed in a washing machine with cold water

Air dry

Each patch is hand done with dye sublimation making cracking or peeling near impossible. Each patch features a black border and an adhesive back that makes applying to clothing easy!

How to attached your patch to fabric:

Important When Applying: Whether you are using a household iron (back side) or a heat press (front side) please use a non-stick sheet (teflon or parchment paper) on the front of the patch. The reason for this is that sometimes when heated the adhesive comes through to the front side of the patch and this will prevent the front side of the patch sticking to something.

Peel off the protective backing

Heat Press: 300° for 15 seconds, press from the front side of the patch

Iron: 300° (wool setting) for 15 seconds, press from the back side of the fabric

Patches can be dry cleaned or washed in a washing machine with cold water

Air dry

Each patch is hand done with dye sublimation making cracking or peeling near impossible. Each patch features a black border and an adhesive back that makes applying to clothing easy!

How to attached your patch to fabric:

Important When Applying: Whether you are using a household iron (back side) or a heat press (front side) please use a non-stick sheet (teflon or parchment paper) on the front of the patch. The reason for this is that sometimes when heated the adhesive comes through to the front side of the patch and this will prevent the front side of the patch sticking to something.

Peel off the protective backing

Heat Press: 300° for 15 seconds, press from the front side of the patch

Iron: 300° (wool setting) for 15 seconds, press from the back side of the fabric

Patches can be dry cleaned or washed in a washing machine with cold water

Air dry

Officially Licensed Michael Myers Halloween II Half Face Back Patch

High Quality Embroidered Patch With Vibrant Colors!

Measurements:  12″ x 9.5″

Michael Myers from John Carpenter’s Halloween 2, a 70s’ Horror Classic!

Each patch is hand done with dye sublimation making cracking or peeling near impossible. Each patch features a black border and an adhesive back that makes applying to clothing easy!

How to attached your patch to fabric:

Important When Applying: Whether you are using a household iron (back side) or a heat press (front side) please use a non-stick sheet (teflon or parchment paper) on the front of the patch. The reason for this is that sometimes when heated the adhesive comes through to the front side of the patch and this will prevent the front side of the patch sticking to something.

Peel off the protective backing

Heat Press: 300° for 15 seconds, press from the front side of the patch

Iron: 300° (wool setting) for 15 seconds, press from the back side of the fabric

Patches can be dry cleaned or washed in a washing machine with cold water

Air dry