Pins and Buttons

Pins and Buttons

Showing 1–25 of 35 results

Products Per Page

Say his name 3 times: Beetlejuice, Beetlejuice, BEETLEJUICE! Here’s a little something for all you strange and unusual pin collectors…

Size: 1.25”

Made By Lively Ghosts

This pin is bound in human flesh and inked in human blood. All blood & flesh has been tested for COVID19. Be sure to keep this pin chained, and don’t listen to any murmurs that might say “we’re gonna get you”. By all means, DON’T JOIN THEM.

It is recommended to carry your boom stick at all times. Chainsaw not included. Do not repeat these words: Kunda astratta montose eargrets gutt nos veratoos Kanda amantos Kanda.

Size: 1.5″

Motherf*cker got blood all over my favorite clown suit!

Features Captain Spaulding art by Far Out. Inspired by the classic 00’s horror.

2” acrylic pin with soft rubber back

This Child’s Play Chucky Large Enamel Pop! Pin measures approximately 4 1/2-inches tall, just like the Pop! Vinyl Figure it’s based on. Not only does the pin have the standard pin backings so you can attach it to bags or a cork board; it also has a “Funko Crown” pin stand allowing it to stand up for a dynamic display! True to it’s namesake, the head is raised making it pop from the body. This large Pop! Pin comes packaged in a window display box.

This Child’s Play Tiffany Large Enamel Pop! Pin measures approximately 4 1/2-inches tall, just like the Pop! Vinyl Figure it’s based on. Not only does the pin have the standard pin backings so you can attach it to bags or a cork board; it also has a “Funko Crown” pin stand allowing it to stand up for a dynamic display! True to it’s namesake, the head is raised making it pop from the body. This large Pop! Pin comes packaged in a window display box.

Don’t be afraid of Chucky. He’s a Good Guy and just wants to be friends til the end!

Features Chucky art from The Bride of Chucky by Far Out.

1.75” acrylic pin with metal butterfly clasp

Jason Voorhees mask enamel pin

There are certain rules that one must abide by in order to successfully survive a horror movie!

Features Scream’s Ghostface art by Far Out.

1.75” acrylic pin with soft rubber back

Set of 3 Collectible Pins
Material: Zinc Alloy
Dimensions: 55 x 33 mm.
Care: Wipe clean with a damp cloth

From the top, make it drop, it’s. GUI-LLO-TINE.

Heads will roll for this one. For all other inquiries, please refer to the Headless Horseman of Sleepy Hollow.

Kefalitemnophobia [the fear of being decapitated] + Thanatophobia [the fear of death].

Size: 2″

Halloween 1978 Judith Myers Tombstone Enamel Pin


This beautiful full color 1.5″ wide soft enamel pin, comes with a double rubber clutch backing and is perfect to put on a shirt, jacket or backpack.

 

Halloween 1978 Michael Myers Enamel Pin

This beautiful full color 1.5″ wide soft enamel pin, comes with a double rubber clutch backing and is perfect to put on a shirt, jacket, or backpack. Show your love for the iconic Halloween slasher flicks with the Halloween 1978 Michael Myers Enamel Pin. 

 

 

Halloween 2018 Pumpkin Enamel Pin


This pin is an interpretation of the iconic jack-o-lantern from the film. This design was used for onset items such as crew shirts and chair backs

This beautiful full color 1.5″ wide soft enamel pin, comes with a double rubber clutch backing and is perfect to put on a shirt, jacket or backpack.

 

Halloween II Michael Myers Enamel Pin

This beautiful full-color 1.5″ wide enamel pin, features the iconic mask of Michael Myers from Halloween II. The pin comes with a double rubber clutch backing to stay in place and is perfect to put on a shirt, jacket or backpack.

The Halloween II Michael Myers Enamel Pin is officially licensed Halloween II Michael Myers Merchandise from Trick or Treat Studios!

 

 

Haunted Hallows. The official Jack-O-Lantern of Lively Ghosts.

Size: 1.5″

Each pack comes with 4 awesome 1″ metal back buttons ready to poke on your favorite bag or jacket.

The “Horror Lover’s” pack comes with:

– “Horror Whore”

– “Slasher Slut”

– “Witchy & Bitchy”

– “Dead Inside”

  • Jason Voorhees Friday the 13th
  • Annabelle The Conjuring
  • IT Pennywise
  • Regan The Exorcist

Features pretty Leatherface art by Far Out. Inspired by the classic 70’s slasher.

2” acrylic pin with soft rubber back

In a nod to the glory days of horror, show off your spooky side with our Michael Myers Enamel Pin affixed to your jean jacket, bag, or cap.

This brilliant 2″ double-studded soft enamel pin features the Shape himself, Michael Myers in all his burning glory. Pin comes with butterfly clasps. LET HIM BURN!!! Other Halloween fans will be burning with envy once they lay eyes on your Michael Myers pin.

Original artwork for the pin was designed and created by Far Out Designs, inspired by the 2018 Halloween Kills film. Far Out Designs has been bringing demented and lowbrow art and merch to the masses since early 2020, lead by owner and lead graphic artist Cameron Buell (Far Out).

Specifications :

  • Silhouette Name: Lapel Pin
  • Fabrication (Content): Zinc Alloy
  • Sizing: One Size
  • Product Dimensions: 3″
  • Care (Washing Care): Wipe Clean With Soft Cloth
  • Imported
  • Packaging: Hang Card

Features Pazuzu art by Far Out. Inspired by the classic 70’s horror.

2” acrylic pin with soft rubber back.

Welcome to the Loser’s Club, buck-o!

Features Tim Curry’s Pennywise art by Far Out.

1.75” acrylic pin with metal butterfly clasp

Trypanophobia: The Fear of Needles.

An homage to Re-Animator

Large: 2.5″

The Salem’s Shadow Pin is a grand 3” pin, featuring exquisite printed details & intricate cutouts for the spiderwebs

The pin is topped with a tiny black bat & adorned with a hanging arachnid fellow

Size: 3″

Follow the rules of Halloween and you’ll be fine!!

Features Sam art from Trick ‘R Treat by Far Out.

1.75” acrylic pin with soft rubber back